+7(495)223-44-50
+7(495)249-27-38
+7(925)771-01-62
+7(495)249-27-38
+7(925)771-01-62
Innova Resin Coated Photo Metallic Lustre 260gsm (IFA72)
0 руб.
- Новинка
- да
- Производитель:
- Innova
- Страна:
- Великобритания
- Тип покрытия:
- Полуглянцевое
- Текстура:
- Гладкая
- Цвет поверхности:
- Natural White
- Основа:
- RC paper
- Тип чернил:
- на основе красителя (Dye ink) / пигментные (Pigment ink)
- Плотность (gsm):
- 260
- Толщина (микрон):
- 267
- Архивность:
- Без оптических отбеливателей (OBA-free) / pH - нейтрально
- Особенности:
- Перламутровое покрытие / Металлик
Упаковка:
Размер:
Количество:
Полное описание
Описание продукта
This Neutral white RC paper has a pearlescent finish with a smooth gloss microporous coating to give excellent colour saturation, gamut and D-max.
Applications include; Photography, portrait printing, posters and exhibiton printing
| Weight (GSM) | 260 |
| Base Material | Resin Coated |
| Coating Type | Microporous Gloss |
| Surface Texture | Smooth pearlescant gloss |
| Thickness (Microns / inches) | 267 / 0.011 |
| Whiteness (CIE) | 80 |
| Brightness (TAPPI) | 82 |
| OBA content | No |
| pH | 7.5-9.5 |
| Roll Size: Availablity / Length / Core size | 17” (432mm) / 24” (610mm) / 44” (1118mm) - 30m - 3” core |
| Printer/Ink Compatibility | Compatible with all commercial thermal and piezo inkjet printers using water-based dye and pigment-based inks such as Epson, Canon and Hewlett-Packard |
| Recommended printer Settings | Photo black inks with generic media setting of ‘Photo Semi-gloss / Lustre’ / ‘Premium Photo paper Semi-matte’ or similar. ICC colour profiles are available from the website. |
Указания по применению:
Paper Handling:
- Avoid touching the coated surface of the paper before and after printing, and wear cotton gloves if necessary.
- Avoid exposure to high temperatures, high levels of humidity and moisture. These factors can affect the drying time of some Olmec™ products.
Conditions of Use:
- Where possible, all paper should be stored and used within the following
range of environmental conditions:
Temperature = 10°- 35°Centigrade
Relative Humidity = 30% - 80% - Unused paper should be stored in its original packaging, out of direct sunlight under normal climatic conditions
- Remove prints from the tray after printing; do not allow them to be stacked.
- Prints should be allowed to dry in air, preferably left uncovered for 24 hours to allow the residual liquid from the inks to evaporate.
- In cases where stacking is unavoidable, a paper interleaf should be placed between each print.
Все рекомендации описаны в качестве ориентира. Они могут быть из критерия испытаний, которые могут подвергаться изменениям без предварительного уведомления.
- Комментарии
- Вконтакте
Загрузка комментариев...
Рекомендуемые товары